;Syntax
;  comment:       ';' (comment end -> linefeed LF = 0x0A)
;  command start: '#' (command end -> linefeed LF = 0x0A)
;  delimiter:     ' ' or ',' or TAB
;  values:        dec=123   hex=$AB   bin=%01000010
;  strings:       "Test" or 'Test' (\$xx special Hexcode in string)
;-------------------------------------------------------
;Commands
;  #LB percent              ; set LED brightness percent = 0..100
;  #DO angle                ; set Display Orientation angle = 0,90,180 or 270
;  #DC                      ; Display Clear (color black)
;  #DF r,g,b                ; Display Fill with color r,g,b
;  #FA r,g,b, xs,ys, xe,ye  ; Fill Area xs,ys < xe,ye with color r,g,b
;  #TC rt,gt,bt rb,gb,bb    ; set Text Color r,g,b -> text + background
;  #TF fs, zx,zy            ; set Text Fontsize (8=6x8, 16=8x16, 10=ascii_10, 14=ascii_14, 20,26,32,40,48,60=Arial_20_26_32_40_48_60) and zoom zx,zy (1..4)
;  #TP x,y,"text"           ; Text Place at posiotion x,y
;  #TS xs,ys,h              ; set global Text Start coordintaes xs,ys and h (lineheight)
;  #TL "text"               ; place Text Line at global position (#TS); after textplace ys=ys+h
;  #BM x,y,BMdata..         ; place BitMap at posiotion x,y BMdata=binary data from *.BMP File
;  #BM x,y,"filename"       ; only for "startTFT.exe" (*.bmp, *.png, *.jpg, *.gif)
;-------------------------------------------------------

#DO 180

#BM 0,0, "DisplayVisions_140x60.bmp"
#FA 255,255,255 140,0 239,59

#TC 0,0,0 255,255,255
#TF 16 1,2
#TP 145,14 "TFT015-22AI"

#FA 190,0,100 0,60 239,239

#TC 255,255,255 190,0,100
#TF 3 1,1
#TS 25,66 19
#TL '- 1.5" IPS TFT-Display'
#TL "- 240x240 dots"
#TL "- 3.3 V single supply"
#TL "- -20..+70 (TOP.)"
#TL "- controller ST7789V"
#TL "- wide viewing angle"
#TL "- 18-Bit RGB interface"
#TL "- or 8/16-Bit parallel"
#TL "- or serial SPI"
